Conceptual wall pack lighting application illustrationApplication illustration

LUMVOLED / LIGHTING COLLECTIONS

Building Exterior & Security Lighting

Building exterior and security lighting helps illuminate entrances, walls, walkways, service areas and property perimeters. Lumvo LED outdoor fixtures include wall-mounted and directional options for commercial and industrial properties.

No products are currently listed in this collection. Use the planning resources below or contact us to confirm suitable products and availability.

This collection is empty

Continue shopping

SELECTION & PROJECT PLANNING

Choosing Building Exterior & Security Lighting

Compare the illustrated differences below, then confirm the selected model and site requirements before ordering.

Understand the building exterior security application — conceptual application illustration
Conceptual application illustration; not a customer project or a measured lighting result.

01

Understand the building exterior security application

Start with the site and the work performed there. A fixture family is a starting point; the final choice depends on the layout and operating conditions.

  • Check: Doorways and pedestrian paths.
  • Review: Boundary spill and neighboring windows.
  • Coordinate: Mounting height and site exposure.
Wall coverageDownward distributionEntrance zone
Planning diagram, not a photometric calculation or installation drawing.

02

Place coverage around the building

  • Mark doorways and pedestrian paths on the site plan.
  • Review boundary spill and neighboring windows before choosing light output.
  • Confirm mounting height and site exposure and document the selected fixture requirements.

BEFORE YOU ORDER

Building Exterior & Security Lighting questions

Confirm model-specific requirements before ordering.

What is the difference between wall packs and flood lights?

Wall packs mount directly to buildings for perimeter lighting, while flood lights provide directional illumination for broader or targeted areas.

What does full cutoff mean?

A full-cutoff design limits upward light and directs more output toward the ground or target area.

Can exterior lights operate dusk to dawn?

Many products support built-in or accessory photocells for automatic dusk-to-dawn operation.

Can security lighting be dimmed?

Some fixtures support 0-10V dimming or sensor-based controls.

How do I verify outdoor suitability?

Check the wet-location or IP rating and installation instructions for the exact model.

Useful lighting guides