Application illustration
SELECTION & PROJECT PLANNING
Compare the illustrated differences below, then confirm the selected model and site requirements before ordering.
01
Start with the site and the work performed there. A fixture family is a starting point; the final choice depends on the layout and operating conditions.
02
BEFORE YOU ORDER
Confirm model-specific requirements before ordering.
The choice depends mainly on ceiling height, room size and target light levels. Lower spaces often use strip or shop lights, while taller areas may use high bays.
Some models support surface mounting, while others use suspension hardware. Check the mounting instructions for each fixture.
Yes on selected commercial models, commonly using 0-10V dimming.
4000K or 5000K is commonly used for clear task visibility, depending on preference and project requirements.
Only if the product is rated for the intended environment. Verify damp, wet or IP ratings before installation.
SELECTION & PLANNING
Workshop lighting should help people see the task rather than only make the empty room look bright. Bench positions, vehicle bays and tools can...
Read guide
APPLICATION & DESIGN
LumvoLED shop lights can be compared as Slim, Standard and High Output groups. The current Slim and Standard ranges list 4ft 60W and 80W...
Read guide
PROJECT DETAILS
Linear strip lighting is useful for utility areas and continuous rows, but linking, mounting and protection vary by model. Build the plan from the...
Read guide
FURTHER READING
An accessory order should identify the exact fixture and installation method. Similar-looking brackets, frames and cables are not automatically interchangeable between product families.
Read guide